7
ASSEMBLY INSTRUCTIONS
1. Rear Main Frame Installation
Remove two M8x30 Bolts (37), four M8x15 Bolts (72), and six Ø8xØ16x1.5 Washers (36)
from the Rear Main Frame (46). Remove bolts with the S6 Allen Wrench provided.
Connect the Middle Section Hand Pulse Sensor Wires (8) from the Rear Main Frame (46)
to the Extension Hand Pulse Sensor Wires II (70) from the Front Main Frame (21).
Attach the Rear Main Frame (46) into the Front Main Frame (21) with two M8x30 Bolts (37),
four M8x15 Bolts (72), and six Ø8xØ16x1.5 Washers (36) that were removed. Tighten
bolts with the S6 Allen Wrench provided.
Allen Wrench S6
Tool:
70
21
46
71
31
70
8
36
72
72
36
37