10
Step 4
Attach the Main Frame (6) onto the Right/Left Handlebar Support Frames (1, 2) with two
Ø10 Washers (14) and two M10x55 Bolts (15). Tighten bolts with two Multi Hex Tools
provided. Tighten the Round Knob (17) by turning it in a clockwise direction into the holes
of the Left Handlebar Support Frame (2) and Main Frame (6).
Connect the Sensor Wire (29) from the Main Frame (6) to the Sensor Wire III (40) from the
Left Handlebar Support Frame (2).
NOTE: It is recommended that you always use the aid of a second person when
assembling the treadmill.
Hardware:
2 Bolts (M10x55)
2 Washers (Ø10)
1 Round Knob (M8x70)
2 Multi Hex Tools (S13, S17, S19)
Tool:
6
2
1
40
15
14
29
17
15
14
