16
RUNNING BELT ADJUSTMENT & LUBRICATION
Running Belt Adjustment:
The running belt is adjusted at the factory; it may come loose during
transportation and from use. After prolong use of running, the belt will stretch
out. If the running belt is shifting to the left, turn on the main power switch of
treadmill and let the running belt run at the speed of 2~3 km/h. Using the hex
key provided, turn the left rear roller adjustment bolt 1/4 turn in the clockwise
direction. You should see the belt start to correct itself by moving back
toward the center. Repeat the above procedure until the running belt is
centered. If the running belt is shifting to the right, turn on the main power
switch of treadmill and let the running belt run at the speed of 2~3 km/h.
Using the hex key provided, turn the right rear roller adjustment bolt 1/4 turn in
the clockwise direction. You should see the belt start to correct itself by
moving back toward the center. Repeat the above procedure until the
running belt is centered.
If the running belt is slipping during use, turn off and unplugged the treadmill.
Using the hex key provided, turn both left and right rear roller adjustment bolts
1/4 turn in the clockwise direction for the same distance, turn on the main
power switch of treadmill and let the running belt run at the speed of 2~3 km/h.
You should now walk on to the running belt to determine if the running belt is
still slipping. Repeat the above procedure until the running belt is not
slipping.
Summary of Contents for 97288HP
Page 6: ...5 OVERVIEW DRAWING ...