background image

 

2

SAFETY INSTRUCTIONS

 

Basic precautions should always be followed, including the following safety 
instructions when using this magnetic treadmill: Read all instructions before using 
this magnetic treadmill. 

 
1.  Check every part of the equipment before exercise.    If there is any defective 

component, replace it immediately; keep the equipment out of use until repair. 

2.  Make sure all parts, bolts and nuts are well assembled and locked before exercise. 
3.  Never insert any object into any opening. 
4.  Never operate this magnetic treadmill if it is not working properly.    If it has been 

dropped or damaged, or been exposed to water, return the appliance to a service center 
for examination and repair. 

5.  Do not attempt any maintenance or adjustments other than those described in this 

manual.    Should any problems arise, discontinue use and consult an 

Authorized 

Service Representative.

 

6.  Wear comfortable and suitable clothing when using the treadmill.    Do not use the 

treadmill barefoot, in only socks or in sandals, always wear athletic shoes.    Never wear 
loose clothing because it could run the risk of getting caught in the treadmill. 

7.  Keep children and pets away from the equipment while in use. 
8.  Do not use the treadmill outdoors.    This magnetic treadmill is for household use only. 
9. Only 

one

 person should be on the treadmill while in use. 

10.  Keep the magnetic treadmill on a solid, level surface with the minimum safety area 

clearance of 2000mm x 1000mm of the magnetic treadmill.    Be sure the area around 
the treadmill remains clear during use and has adequate clearance. 

11.  Hold the handlebar with your hands when starting or stopping exercise and increasing 

or decreasing the speed. 

12.  If feeling chest pains, nausea, dizziness, or short of breath, you should stop exercising 

immediately and consult your physician before continuing. 

13.  The maximum weight capacity for this product is 110kgs. 
 

WARNING:

 

Before beginning any exercise program consult your physician.   

This is especially important for the persons who are over 35 years old or who have 

pre-existing health problems.    Read all instructions before using any fitness 

equipment.

 

 

CAUTION:

 Read all instructions carefully before operating this product.     

Retain this Owner’s Manual for future reference. 

 
 

Summary of Contents for Magnetic



















Reviews: