7
Step 2
Connect the Hand Pulse Sensor Wire (16) from the Right Handlebar Support Frame (1) to
the Sensor Cable II (59) from the Handlebar (49).
Connect the Hand Pulse Sensor Wire (16) and Sensor Cable III (60) from the Left
Handlebar Support Frame (2) to the Sensor Cable II (59) and Sensor Cable I (58) from the
Handlebar (49).
Attach the Handlebar (49) into the Right/Left Handlebar Support Frames (1, 2) with two
M6x12 Bolts (48). Tighten bolts with the Allen Wrench provided.
Remove two M5x10 Bolts (20) from the Computer (19). Connect the Sensor Cable I (58)
and Sensor Cables II (59) from the Handlebar (49) to the wires that come from the
Computer (19).
Attach the Computer (19) onto the plate of the Handlebar (49) with two M5x10 Bolts (20) that
were removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
19
49
1
2
60
59
16
48
48
58
59
16
60
20
59
58
Allen Wrench #5
Multi Hex Tool with Phillips Screwdriver
Tool:
2 Bolts (M6x12)