LifeGear METEOR, Owner'S Manual

12

OPERATING THE COMPUTER   

 
SPECIFICATIONS: 

TIME --------------------------------------------------- 0:00-99:59 MIN: SEC 
SPD (SPEED) --------------------------------------- 0.0-99.9 KM/H 
DIST (DISTANCE) ---------------------------------  0.0-999.9 KM 
CAL (CALORIES) ----------------------------------  0.0-999.9 KCAL 
ODO (ODOMETER) -------------------------------  0-9999 KM 
PULSE ------------------------------------------------  40-240 BEATS/MIN

 
USING YOUR COMPUTER 

The computer can be activated by pressing the buttons or by pedaling.    If you leave the 
equipment for 4 minutes, the power will turn off automatically. 

 
BUTTON FUNCTIONS:

MODE:

 Press the MODE button to select each function of the computer.   

Press and hold the MODE button for 3 seconds to reset all data values to zero except the 
ODO (ODOMETER) data values.

 
UP:

 Press the UP button to increase the data values of TIME, DISTANCE, CALORIES, or 

PULSE for target pre-setting.

 
DOWN: 

Press the DOWN button to decrease the data values of TIME, DISTANCE, 

CALORIES, or PULSE for target pre-setting.

 
RESET: 

Press the RESET button to clear data values of TIME, DISTANCE, or CALORIES to 

zero.

Press the RESET button to clear data values of TIME, DISTANCE, CALORIES, or PULSE to 
zero for target pre-setting. 
Press and hold the RESET button for 3 seconds to reset all data values to zero except the 
ODO (ODOMETER) data values.

 
COMPUTER FUNCTIONS: 
SCAN:

 Press the MODE button until the screen displays SCAN, the computer will 

automatically scan each function in sequence with change every 6 seconds. 

TIME: 

Displays your elapsed workout time in minutes and seconds.    You may also pre-set 

target time in STOP mode before training.    To set TIME press the MODE button until you 
see the TIME on the screen.    Press the UP or DOWN button, TIME begins blinking.    Press 
the UP or DOWN button to change the time, each time you press the UP or DOWN button 
TIME should change by 1 minute.    Press the RESET button to clear the target time to zero.   
The pre-set target time range is from 0:00 to 99:00 minutes.    Once you pre-set target time 
and then start to exercise, time starts counting down from pre-set target time to 0:00 per 1 
second backward.    When the pre-set target time counts down to 0:00, time will start to 
count up immediately and the computer will begin beeping to remind you. 

 
SPD (SPEED): 

Display the current training speed.