25
Insert the plug connected to the jumper cables
securely into the Jump Starter. If the green and
red lights flash alternately, you are safe to move
on to the next step.
1.
Connect the red clamp to the positive terminal
(+) and the black clamp to the negative
terminal (-). If the green and red lights flash
alternately, you are safe to move on to the next
step.
However, if the red indicator light is on:
1. The jumper cables might be connected
to the wrong terminal. If so, disconnect the
clamps from the vehicle and the Jump Starter
and connect them correctly
2. Adjust the clamps for maximum contact with
the battery terminals.
2.
If you failed to jump start your car, remove the
clamps from the battery and the Jump Starter.
Wait for at least 30 seconds, then reconnect
them. If you failed to start your car after two
attempts, you can use the force start function
and move on to step 3-b.
3a.
Jump starting your car
