28
LED indication
Situation
The green/red
light flashes
Ready for usage
The green light
stays on
Work status
The red light
stays on
- The clamps are reversely connected. Check if this is the case.
- The clamp is short-circuited. Check whether the two clamps together
connect or connect the clamps to the same piece of metal.
The red light
flashes slowly
- Back charge protection is activated, the voltage of the car battery is
higher than 12.6V. No jump start needed, the car battery is enough to start
your car
The red light
flashes quickly
The temperature of the clamp exceeds 65°C (+/- 5°C)
Remove the clamp until the red and green lights flash.
The green light
flashes slowly
The voltage of the starter is too low
Try to replace the power supply or charge it in time.
LED Indication and Safety