Benefits
●
The primary benefit of the EAGLE Lift is the ability to control and assist in lifting full trash containers into
dumpsters without twisting.
●
The EAGLE Lift has the ability to suspend the container in the “dump” position to allow liquid contents
to drain completely and for washing out the containers.
ASSEMBLY
The EAGLE Lift is easy to assemble! For fast and safe assemblage, make sure you have the right parts and tools
before proceeding also spend a moment and see the assembly video at Lifelineliftco.com.
This box contains:
● Main Body/Garbage Can Receiver/Lift Mechanism (this is the largest piece in the box)
● Wheel Base Stabilizer
● Dumpster Attachment Hook
● Trash Container Receiver (with the one small wheel attached)
● Handle assembly
Additional assembly tools required, but not included:
● Wrench and small socket set
● Mallet
Have everything? Great! Now simply follow these three easy steps:
Step 1
: Locate the Main Body and the Wheel Base. Be sure the concave curve of the stabilizer bar on the Wheel
Base is facing out ( the stabilizer bar will rest against the dumpster side when lifting)
Connect the Trash Container
Receiver to the base by lining up the two and tapping until seated. Carefully snug bolts by alternating tightening to
the base
. Do not over tighten!
Step 2:
Align the trash container receiver with the main body and bolt together. Set the lift upright with wheels
touching the ground.
Step 3
: Insert the Dumpster Attachment Hook into the top end of the Main Body. The hook will drop down and stop
when fully inserted.. Find the hand knob provided and screw in place for locking the hook in place. Insert the 3 ½
inch carriage bolt through the lift arm and put the nut and lock washer on and tighten. Slide the lift handle sleeve and
secure with the knob
Review website photos to compare how your EAGLE Lift look fully assembled and in use. For further
instructions on how to assemble this device, please visit
