background image

8

    X-FlexCycle Pro User Manual   Lifepro

In order to get in the habit of using your exercise bike every day, it’s helpful 
to set it up in a convenient, comfortable location. The X-FlexCycle Pro is 
designed to take up a minimal amount of floor space and to look great in any 
room of your home. 

 

IMPORTANT SAFETY NOTES FOR PLACEMENT OF YOUR 

X-FLEXCYCLE PRO

•  Do not use the X-FlexCycle Pro outdoors.
•  Do not place the bike near water or in high-moisture environments.
•  Set up the X-FlexCycle Pro where there will be at least 2 feet of clearance 

on all sides of the bike.

•  Only operate and store the X-FlexCycle Pro on a clear, flat, clean floor.
•  We recommend you place a non-slip mat or rug under the exercise bike to 

protect your carpet or floor. Before beginning exercise, ensure the floor 
covering will not slide during use. The floor covering should be at least  
56” × 30”. 

 

CAUTION: 

Take care when lifting or moving the bike. Always use proper 

lifting techniques and use assistance when needed.

Re Fitness Collection    

9

  

Re Fitness Collection    

9

  

FIRST STEPS

1.  Remove your X-FlexCycle Pro from the shipping box and remove the 

packaging from the main body of the bike and parts and open the 
hardware bag.

NOTE: 

Most of the hardware (bolts, washers, and nuts) comes pre-fitted to 

the associated part. Do not remove pre-fitted hardware until instructed to 
do so.

2.  Visually confirm that all parts, hardware, and tools listed on the 

previous page are included.

3.  Read carefully through this user manual and all safety instructions 

before assembling and using the X-FlexCycle Pro.

4.  Go to 

xflexcyclepro.lifeprofitness.com

 and register your product within 

14 days of purchase to activate your lifetime warranty.

5.  Complete the steps in the 

30-MINUTE ASSEMBLY GUIDE

 on page 10 

to assemble your X-FlexCycle Pro.

 

CAUTION: 

Take care when lifting or moving the bike. Always use proper 

lifting techniques and use assistance if needed.

NOTE: 

Assemble the bike on a flat surface at least 6-by-6-foot, free of 

obstructions.

CUSTOMER SUPPORT 

If you have any questions about assembling or using your 
X-FlexCycle Pro, we’re here to help. Call or email us and an experienced 
customer support representative will be happy to assist you: 

 

(732) 456-6063

 or 

support@lifeprofitness.com

.

X-FLEXCYCLE PRO

E X E R C I S E   B I K E

Summary of Contents for Recovery + Fitness X-FLEXCYCLE PRO


























Reviews: