Battery Indicator LEDs
The 4 LEDs indicate the current
battery level. LEDs flash during
charging and remain lit when the
battery is fully charged.
Massage
Attachment
(1 of 6)
Silicone Handle/Battery
DC Charging
Port
SoarFX Collection
9
8
DynaFlow
User Manual Lifepro
FULLY CHARGE THE BATTERY
• Ensure the
DynaFlow
is OFF before charging.
• Charge the battery fully (for about 3 hours)
before using your DynaFlow for the first time.
Charge Using the AC adapter
1. Connect the AC adapter to the charging
port at the base of the battery/handle.
2. Plug the adapter into a wall outlet.
OR
Charge Using the Charging Dock
1. Insert the unit into the charging dock.
2. Plug the AC adapter into the rear of the
charging dock.
3. Plug the adapter into a wall outlet.
INSERT A MASSAGE ATTACHMENT
• Make sure the
DynaFlow
is fully charged and
powered OFF.
• Select the desired massage attachment.
• Insert the stem of the massage attachment
into the nozzle of the
DynaFlow
.
NOTE:
The spinal attachment has a small
raised notch on the stem of the attachment.
Ensure the small notch is lined up with the
cutout on the nozzle of the unit.
• Press the massage attachment in firmly to
secure it.
• See MASSAGE ATTACHMENTS & SPEED
OPTIONS on page 12.
2
1
Power/Speed Button
Press and hold the
button to power on
the DynaFlow. Tap
the button to toggle
through the 5 vibration
speed levels (1-5).
Speed Indicator LEDs
The 5 LEDs indicate
which vibration speed
level is selected (1-5).
