Please read the operating instructions before using the
DynaFlex Mini
.
Keep this manual for reference.
CHARGING THE BATTERY
• Fully charge your
DynaFlex Mini
for up to 6 hours before using it for the first
time.
• After the first charge, your
DynaFlex Mini
should typically take 3-5 hours to
charge.
• The Battery Indicator LEDs will flash during charging. When the battery is
fully charged, the Battery Indicator LEDs will remain lit.
• The two Battery Indicator LEDs indicate the following battery levels:
• 2 LEDs lit = ~50-100%
• Average run-time is 2-3 hours per charge at high speed and 4-5 hours at low
speed level.
USING YOUR
DYNAFLEX MINI
1. Press and hold the Power/Speed button for two seconds to power on the
DynaFlex Mini. The Battery Indicator LEDs at the base of the handle will
light up to indicate that the unit is now powered on.
2. Tap the Power/Speed button once to set the vibration speed to level 1. The
first Speed Indicator LEDs will light up to indicate speed level 1 is selected.
a. Tap the Power/Speed button a second time for speed level 2. Two of the
Speed Indicator LEDs will light up.
b. Tap the Power/Speed button a third time for speed level 3. All three
Speed Indicator LEDs will light up.
3. At the desired speed, float the head of the massage attachment along a
muscle group. Apply pressure as needed.
4. Press and hold the Power/Speed button for two seconds to power off the
unit.
5. Always power off the unit after each use.
6. The unit will auto shutdown after 15 minutes of use. To continue use, just
press and hold the Power/Speed button for two seconds to power on the
unit.
10
DynaFlex Mini
User Manual Lifepro
REMOVING AND REPLACING
A MASSAGE ATTACHMENT
1. Press and hold the Power button for two seconds to power off the unit.
2. Grab the inserted attachment and firmly pull out to remove it.
3. Insert the stem of a new attachment into the nozzle of the unit.
4. Press the attachment in firmly to secure it.
ROTATE THE MASSAGE ARM 90°
1. Hold the DynaFlex by the handle with one hand.
2. Use your other hand to push the massage arm up.
The arm will rotate 90° to point straight up.
SoarFX Collection
11
TIPS FOR USING YOUR
DYNAFLEX MINI
• Move the DynaFlex Mini over the desired muscle groups, about 60
seconds per region.
• The slower you move the massage head over your muscles the
better. Move approximately 1 inch per second.
• Apply pressure as needed; however, there should never be a need to
press very hard. The vibration pulses do all the hard work!
• Use the DynaFlex Mini for 15-minute sessions, up to 3 times per day.
• Avoid keeping the massage head in one area for more than 3 minutes.
• Prolonged application can traumatize tissues.
• When using the two metal massage attachments, avoid lingering in
any one area as the metal could cause discomfort.
• 1 LED lit = ~0-50%
