ATTACH THE COMPUTER &
HANDLEBARS
1. Insert the front handlebar frame
(14)
into the slots at the top of the
main bike frame
(1)
.
2. Secure the front handlebars using
four M6×15 bolts
(15)
and four
flat washers
(16)
.
3. Use the hex key to tighten the
bolts.
4
ATTACH THE PEDALS TO
THE BIKE FRAME
1. Identify the left (“L”) and right
(“R”) pedals. Identify the left (“L”)
and right (“R”) crank arms.
2. Thread the right pedal
(19)
CLOCKWISE
onto the right crank
arm
(20)
.
3. Use the wrench to secure the
pedal to the crank arm.
4. Thread the left pedal
(22)
COUNTER-CLOCKWISE
onto the
left crank arm
(22)
.
5. Use the wrench to secure the
pedal to the crank arm.
CAUTION:
Do not mix up the left
and right pedals.
6
15
22
23
21
20
1
17
17
17
17
16
16
18
19
CONNECT THE SPEED
SENSOR CABLE
1. Insert the male speed sensor cable
(18)
into the female speed sensor
cable
(17)
.
5
Re Fitness Collection
13
12
X-FlexCycle Plus User Manual Lifepro
Re Fitness Collection
13
INSTALL TWO AAA
BATTERIES
1. Remove the back cover
(A)
of
the computer monitor
(C)
.
2. Insert two AAA batteries
(B)
into the battery compartment
according to the polarity
markings in the compartment.
3. Replace the back cover.
CAUTION:
Never mix old
batteries and new batteries. Only
use AAA batteries with the
computer monitor.
7
A
B
C
CAUTION:
Be sure to fully tighten the pedals. Riding the bike with loose
pedals can cause injury and/or strip the pedals.
