Re Fitness Collection
11
ASSEMBLY NOTES
• Assemble the bike on a 6-by-6-foot flat surface, free of obstructions.
• Pre-installed hardware must be removed from most parts before
assembling.
1
10
X-FlexCycle User Manual Lifepro
Re Fitness Collection
11
SECURE THE SEAT TO
THE SEAT POST
1. Attach the seat
(9)
to the seat
adjustment post
(10)
. There
are three studs on the bottom
of the seat which insert
through the holes on the top of
the seat post.
2. Secure the seat to the seat
post using three flat washers
(11)
and three lock nuts
(12)
.
3. Use a wrench to tighten the
lock nuts.
2
3
ATTACH THE FRONT AND
REAR STABILIZERS
1. Place the folding/locking pin
(3)
in position to lock the main bike
body into its setup position.
2. Attach the front stabilizer
(4)
to the main bike body
(1)
using
two M8×50 bolts
(6)
, two curved
washers
(7)
, and two M8 cap
nuts
(8)
.
3. Attach the rear stabilizer
(5)
to
the main bike body
(1)
using two
M8×50 bolts
(6)
, two curved
washers
(7)
, and two M8 cap
nuts
(8)
.
4. Tighten all four cap nuts with
a wrench.
SECURE THE
BACKREST POST TO
THE SEAT POST
1. Attach the backrest frame
(13)
to the seat post
(10)
using two M8×50 bolts
(6)
,
two flat washers
(14)
, and two
lock nuts
(12)
.
2. Use a wrench to tighten the
lock nuts.
1
9
10
7
7
6
7
4
5
6
8
3
6
8
12
12
11
11
12
8
8
7
11
6
10
13
6
14
14
12
12
