background image

A8 / A8P Installation Manual

8

PB

Section

P03-004 Rev A06   10/16

Important: 

All information, including illustrations, is believed to be reliable. Users, however, should independently 

evaluate the suitability of each product for their particular application. LifeSafety Power makes no warranties as to the 

accuracy or completeness of the information, and disclaims any liability regarding its use. LifeSafety Power’s only ob-

ligations are those in the LifeSafety Power Standard Terms and Conditions of Sale for this product, and in no case will 

LifeSafety Power or its distributors be liable for any incidental, indirect, or consequential damages arising from the 

sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In addition, LifeSafety 

Power reserves the right to make changes—without notification to Buyer—to processing or materials that do not affect  

compliance with any applicable specification.

LifeSafety Power, FlexPower, NetLink, GreenSmart, FlexConnect, PowerCom, Reli, SureCharge, TruWatt, and VSelect are 

trademarks or registered trademarks of LifeSafety Power Inc. or its affiliates.

© 2016 LifeSafety Power, Inc. All rights reserved

LifeSafety Power Inc.

304 Terrace Drive

Mundelein, IL  60060 USA

www.lifesafetypower.com

Tel (888) 577-2898
info@lifesafetypower.com

Summary of Contents for FlexPower A8









Reviews: