the LifeScan Technical
Service Department via the
toll-free numbers listed
below:
Canada 1 800 663-5521
U.S.A.
1 800 227-8862
MEASUREMENT
CONVERSION.
The
ONE TOUCH II Meter can
display units either in
mmol/L or mg/dL. To select
the unit measurement of
your choice, see Chapter 9,
Setting Date, Time, and
Other Special Functions
for
instructions. All example
results in this Owner’s
Booklet appear in mmol/L.
Verify which unit of
measure you are using
before
you begin testing.
TEST STRIP HOLDER. The
dark gray Test Strip Holder
holds the Test Strip in
place. The Meter reads the
color of the reacted Test
Strip through the small hole
in the Test Strip Holder. The
Test Strip Holder needs to
be removed from the Meter
for cleaning. (See the
instructions in Chapter 8,
Cleaning and Maintaining
the Meter.
)
TEST AREA. When the Test
Strip Holder is removed, the
Test Area is exposed. The
Test Area has a clear,
protective coating over the
Meter optics that must be
kept clean and lint-free for
accurate results. Be careful
not to scratch or damage
this coating. (See Chapter 8,
Cleaning and Maintaining
the Meter
.)
DATA PORT. This port lets
you access the information
stored in the Meter’s
memory with a Data
Manager
™
from LifeScan,
or other data management
•
9
•
LSI-97-051 OT2.bklt.C.Eg 10/8/97 3:10 PM Page 9 (1,1)
