•
36
•
Go Back to Step 1 in Chapter 6,
Testing
Your Blood,
and start over with a new
Test Strip. Make sure you are following
the instructions carefully.
There may be an electronic
problem with your Meter.
Call the LifeScan Technical Service
Department.
Canada
1 800 663-5521
U.S.A.
1 800 227-8862
The Test Strip was
inserted before the Meter
was ready for it.
Remove
the Strip from the Test
Strip Holder, wait for
insert strip
to
appear, then insert the Test Strip again.
The Meter has lost some
important information,
including the current code
number, mmol/L unit
setting, date, time, and other special
functions which you may have selected.
To reset the code number to match your
test strips, see Chapter 4,
Coding the
Meter.
To reset the unit of measurement
to mmol/L, and other special functions,
see Chapter 9,
Setting Date, Time, and
Other Special Functions.
If the message
reset code
appears again, contact
LifeScan Technical Services.
reset
code
remove
strip
not ok
LSI-97-051 OT2.bklt.C.Eg 10/8/97 3:10 PM Page 36 (1,1)
