have the correct date and
time appear with each test
result that you recall from the
meter memory. You will need
to reset the date and time
whenever there is a change to
or from daylight saving time.
However, your test results will
not be affected if you don’t set
the clock.
To set the clock:
Using the M and C buttons
at the top of the meter,
follow the instructions in
the chart, page 52, to set
the meter clock.
You may save your selection
and exit at any time by
turning the meter off.
Note: When the date and
time are changed, the average
blood glucose value may also
change. For information, see
page 63. The average is
calculated from the results
obtained during the 14 days
preceding the current clock
setting.
51
LSI-99-221_9/2/99 11/11/99 11:01 AM Page 51
