background image

15 

 

 

Limited Manufacturer Warranty 

1 Year Limited Warranty:

  

LIFESMART

 warrants this heater against defects in materials and workmanship 

on functional parts,

 for a 

period of 1 year from the original date of purchase. 

Your sales receipt showing the date of purchase of the 

product is your proof of purchase. 

Keep it in a safe place for future reference. 

 

Manufacturer Warranty  

   All 

LIFESMART

 products are manufactured with the highest quality materials and are warranted to be free 

from defects in material and workmanship at the time of purchase. This limited warranty applies to products 
manufactured or distributed by the LIFESMART brand name, are delivered in the continental United States, 
and extends to the original purchaser, or gift recipient. This warranty becomes valid at the time of purchase 
and  terminates  either  by  the  specified  time  frame  listed  above  and/or  owner  transfer  (unless  otherwise 
authorized by LIFESMART, as the manufacturer). Any extended warranties (warranties that cover above and 
beyond this manufacturer warranty) that are sold through a retailer or third party, are not directly correlated 
with this LIFESMART limited warranty, and may be redirected to said retailer or third party for coverage.  

 

Extent of Warranty 

This warranty extends through the manufacturer of the product, and covers functional parts only. Cosmetics 

are not covered, unless unequivocally determined it is a manufacturer/workmanship defect. Note that surface 
cracks are not considered defects in material or workmanship, as they are normal characteristics of all wood 
and some plastics.

 

Unless LIFESMART was the direct shipper, shipping damage should be addressed with the 

shipping company, retailer, or place of purchase, prior to making a claim to LIFESMART, as the manufacturer.

 

   The manufacturer's sole obligation under this warranty shall be limited to furnishing the original purchaser 
replacement parts for units deemed 

repairable

 by the 

LIFESMART

 warranty department. The purchaser may 

also opt to ship the product to LIFESMART to have it repaired. The purchaser will be responsible to prepay 
any shipping charges (both ways), export taxes, custom duties and taxes, or any other charges associated with 
the  transportation  of  the  unit.  In  addition,  the  purchaser  is  responsible  for  insuring  any  parts  shipped  or 
returned,  if  desired.  For  products  the  warranty  department  deems 

un-repairable,  or  discontinued,

 

LIFESMART

 reserves the right to issue a refurbished product, or product similar in size and functionality as 

a  replacement  for  the  defective  unit, 

if  available. 

All  exchanged  parts  and  products  replaced  under  this 

warranty  will  become  the  property  of

  LIFESMART

.

  LIFESMART

  reserves  the  right  to  change 

manufacturers  of  replacement  parts  or  products  for  use,  in  order  to  cover  any  existing  warranty.  Any  parts 
determined  defective  may  asked  to  be  returned  to 

LIFESMART 

or  its  representatives  to  validate  a  claim. 

Non-Warranty replacement parts will be warranted 30 days from the time the purchaser receives them.  

   

 The purchaser must present 

LIFESMART

 with proof of purchase documents (including the date of purchase) 

if requested. Any evidence of alteration, erasing, or forgery of proof of purchase documents will be just cause 
to 

VOID

  this  limited  warranty.  Products,  in  which  the  serial  number  has  been  defaced  or  removed,  are  not 

eligible for warranty coverage. Continued… 

 

 

 

 

 

 

 

Summary of Contents for INFRARED HEATER


















Reviews: