background image

13 

 

 

3.  Setting the 

POWER OFF TIMER 

Function 

Note: The Power-Off-Timer Function will allow for the heater to power OFF after a certain set time, and can 
only be set while the heater’s display is in the “On” position. 

 

 

    Or      

 

Turn the heater to the “On” position. Press the Timer 
button on the heater’s control panel or the remote. 

 

The digital display changes from the “temperature” to the 
“hours” option for the timer. Continue to press the timer 
button to change the number of hours you would like the 
heater to run before powering itself off.  The hour options 
for the timer are from 0 to 12 hrs. (in 1 hr increments). 

 

The selected hour increments will flash for a few seconds, 
then revert back to the set desired temperature. The Timer 
indicator light will remain lit as long as the Timer is set. 
The heater will power OFF when the internal heater clock 
counts down the hour increments you set.

 

 

 

 

4.  Setting the 

POWER-ON-TIMER 

Function 

  

Note: The Power-ON-Timer Function will allow for the heater to power ON after a certain set time, and 

can only be set while the heater’s display is in the “Off” position. 

 

    Or      

 

Turn the heater to the “OFF” position. Press the Timer 
button on the heater’s control panel or the remote. 

 

The digital display shows the “hours” option for the timer. 
Continue to press the timer button to change the number of 
hours you would like the heater’s internal clock to count 
down before powering itself on.  The hour options for the 
timer are from 0 to 12 hrs (in 1 hr increments). 

 

The Timer indicator light will remain lit as long as the 
Timer is set. The heater will power itself ON when the 
internal heater clock counts down the hour increments you 
set.

 

 

 

 

 

 

Summary of Contents for LS-4P1500-HOM




















Reviews: