background image

 

2

 
Thank you for choosing a 

LIFESMART

 Infrared Zone Heating System. This owner’s manual will provide 

you with valuable information necessary for the proper care and maintenance of your new product. Please 
take a few moments to thoroughly read the instructions and familiarize yourself with all the operational 
aspects of your new heater.  
 
 

IMPORTANT INSTRUCTIONS 

When using this electric unit, basic safety precautions should always be followed to reduce the risk of fire, 
electric shock, and injury to persons, including the following: 

1.

 

Read ALL instructions before using this unit. 

2.

 

CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater yourself. 

3.

 

This heater may get hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If 
provided, use handles when moving this heater.  

4.

 

Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and curtains at least 
3 ft from the front of the heater and keep them away from the sides, top, and rear. DO NOT place 
towels or other objects on the heater.  

5.

 

Extreme caution is necessary when any heater is used by or near children or the disabled, or when 
the heater is left operating and unattended. 

6.

 

DO NOT operate any heater with a damaged cord or after the heater malfunctions, has been 
dropped or damaged in any manner. Return heater to authorized service facility for examination, 
electrical or mechanical adjustment, or repair. 

7.

 

This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. 
NEVER locate heater where it may fall into a bathtub or other water container. To protect against 
electrical hazards, DO NOT immerse in water or other liquids.  

8.

 

DO NOT touch the control panel or plug with a wet hand.  

9.

 

DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar 
coverings. Arrange cord away from traffic area and where it will not be tripped over. 

10.

 

DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may 
cause an electric shock or fire, or damage the heater. 

11.

 

To prevent a possible fire, DO NOT block the air intakes or exhaust in any manner. DO NOT use 
on soft surfaces, like a bed, where openings may become blocked.  

12.

 

A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, 
explosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and 
open flames. 

13.

 

Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. 
However, if you have to use an extension cord, the cord shall be No. 16 AWG minimum size and 
rated not less than 1500W.  

14.

 

To avoid fire or shock hazard, plug the unit directly into a 120 V AC electrical outlet. 

15.

 

To disconnect heater, turn controls to OFF, then remove plug from outlet. Pull firmly on the plug, 
DO NOT unplug by pulling on the cord. 

16.

 

Always unplug the unit before moving or cleaning, or whenever the heater is not in use. 

17.

 

Use only for intended household use as described in this manual. Any other use not recommended 
by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not 
recommended or sold by unauthorized dealers may cause hazards. 

Summary of Contents for LS1000-2







Reviews: