background image

 

3

18.

 

Always use on a dry, level surface. Use on floor only.  

19.

 

DO NOT use outdoors. 

20.

 

WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any solid-state 
speed control device. 

21.

 

DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so 
will void your warranty. The inside of the unit contains no user serviceable parts. Qualified 
personnel should perform all servicing only. 

22.

 

Connect to properly grounded outlets only. 

23.

 

.Save these instructions. 

 

 

SPECIFICATIONS 

Voltage Rating  

120 V (60Hz) 

Power Consumption 

1500W 

Unit Size 

13.1 

 

in. (W) x 16.5 in. (D) x 16.7 in. (H) 

Unit Weight 

22.7  lbs 

 

 

SAFETY FEATURES 

Tip-Over Safety Feature 

This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will 
automatically shut the heater off. Once the heater is restored an upright position, the heater will reset. To 
continue operation, turn on the heater using the supplied remote control or the control panel on the heater. 

Overheat Safety Feature 

This heater is equipped with a overheat safety feature. When the heaters internal components reach a 
certain temperature that could cause overheat and possible fire, the heater will automatically shut off. 
 

 

WARNING: 

This heater has a voltage rating of 

120 volts. The cord has a plug as shown in A. An 
adapter as shown in C is available for connecting 
three-blade grounding-type plugs to two-slot 
receptacles. The grounding lug extending from the 
adapter must be connected to a permanent ground 
such as a properly grounded outlet box. The 
adapter should not be used if a three-slot grounded 
receptacle is available. 
 
DO NOT DEFEAT THE SAFETY PURPOSE OF 
THE GROUNDED PLUG.  

WARNING: 

 It is normal for the power cord to feel warm to the touch; however, a loose fit between the 

outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different 
outlet. Contact a qualified electrician to inspect the original outlet for damage. 

Summary of Contents for LS1000-2







Reviews: