�
How to move
When moving,please turn off main power switch,then unplug the power plug.
Using caster to move
• Please put the back of the chair to the bottom and then hit the rear wheel, then move.
• Lift up the calves-rest, then recline the chair to approximately 45 degreed to easily move
the chair around the house with as slight pull or push.
AcAur10N
• The chair cannot be moved if the passage is less than 29.528 in in width.
• Contact the dealer in case you cannot move the chair normally.
• Due to the heavy weight of the chair,make sure that it will not damage
your waist or other parts of your body during moving.
• Controller is connected to the chair,make sure it does not fall during
moving.
• Do not move the chair with person loaded.
• Please move the chair after unplugging.
--->Otherwise it may cause damages to the power plug,causing fire
disaster or electric.
Place the headrest pad
• Attach the upper backrest pad to backrest with zipper.
• Attach the pillow pad to backrest with velcro.
Remote Controller Connection
• Connect the cable of remote controller with the cable located under chair seat.
e cable under seat
he cable of remote controller
� the cable of remote controller
How to switch on the power
• Plug the power cord into power inlet, turn on the power switch.
Power Switch
Power Inlet
