background image

*

If the rollers get stuck,turn of the switch and press the ON/OFF button.the roller will be back to

its initial position.

AwARNING 

• 

Do not connect power cord to an external transformer 

AcAUTION 

• Ensure the main power switch is off before plugging the power socket or

controller.

• Please insert power plug and controller plug fully

• Read this manual book carefully before using,set the chair according to

the requires,ensure normal operation 

Connecting the power 

Check the power cord,power plug,socket on the chair,main power 

switch,controller are not broken for the first time use or use after 

long time storage.  Then plug in power cord. 

� 

<. 

�>--

Power cord 

Plug 

Controller wire 

Power Socket 

Confirm the fabric 

Make sure if the fabric is damaged according to the following procedures before use. 

CD Open zipper and  back cushion 

from one side 

@  Put your hand between cushion and 

backrest to see if the fabric is damaged. 

Fabric 

Open from this side 

Back cushion 

CAUTION 

Before using the chair, confirm that whether there is damage in the material 

of  the  armchair  or  of  other  parts.  In  case  of  damage,  even  the  smallest 

tearing,  in  the  chair,  please  stop  using  it  immediately,  trun  off  the  power 

switch, unplug the chair, and contact the customer service center. Never use 

the armchair with dismantled cushion or damaged material, otherwise there 

will be serious safety hazard. 

Adjustment of chair angle 

Raise the backrest 

BACK  UP 

Press this button to raise the backrest.  Press the button again to confirm the position 

when the backrest is at the desired angle 

BACK  DOWN 

Decline the backrest 

Press this button to decline the backrest. Press the button again to confirm the position 

when the backrest is at the desired angle. 

Attention:When main power switch that is at the back of the chair is on,angle adjusting can still be 

done even not pressing On/Off button of controller.However angle adjustment is unavailable when 

in emergency stop condition. 

When adjusting angle,please make sure there is no person(Especially 

WARNING 

children) or pet around.Besides.there must be at least 19. 6in space in

.a 

the front or at the back of the chair,and there is no other object in the 

way when rotating. 

Summary of Contents for R8368











Reviews: