Summary Of Conditions,Testing And Regulatory Approvals
For The 810c Water Filter and ScaleSolver
Warranty
Details
The ScaleSolver must be installed and serviced by an authorized LifeSource Water Systems, Inc. dealer or other entity
approved by LifeSource Water.
Any component failure must not result from abuse, fire, freezing or other acts of nature, violence, or improper installation.
Equipment must be installed and operated in compliance with the local plumbing codes, EPA regulated and LifeSource
approved well water.
Equipment is limited to use at water pressures not to exceed 100 PSI.
Water supply must not exceed 3.0 PPM chlorine. For water supply exceeding 3.0 PPM chlorine, pretreatment is required.
A LifeSource water filter is recommended.
Water must not contain copper and other metals in excess of EPA guidelines for municipal water.
Defective parts are subject to inspection by either LifeSource Water Systems, Inc. or any authorized representative before
final commitment of warranty adjustment is made.
LifeSource Water, Systems Inc. reserves the right to make changes or substitutions in parts or equipment with material of
equal quality or value.
The ScaleSolver system is tested and certified to NSA/ANSI Standard 61. PowerTAC tested at Arizona State University using the
German DVGW-W512 test protocol.
*German Technical and Scientific Association for Gas and Water.
The ScaleSolver system (including the tank, media and valve head) is warranted for performance for a period of
three years
from the date of the original installation.
The ScaleSolver warranty is
four years
when installed in conjunction with a LifeSource Water System in the proper
configuration.
LifeSource Water Systems, Inc. warrants the ScaleSolver system as follows:
Our obligation under this warranty, with respect to the tank or valve, is limited to furnishing a replacement for, or at our option,
repairing any part or parts to our satisfaction that prove defective within the warranty period stated above. Such replacement
parts will be delivered to the owner F.O.B. nearest factory, at no cost, excluding freight and local labor charges, if any.
Our obligation under this warranty, with respect to the ScaleSolver media, will be limited to furnishing a replacement for the
media within three years from date of original installation. Such replacement media will be delivered to the owner F.O.B. nearest
factory, at no cost, excluding freight and local labor charges, if any. Damage to the media due to chlorine, other oxidizers or
fouling or any other operation outside of the limits shown under Specifications, is not covered by this warranty.
LifeSource Water Systems, Inc. shall not be liable for freight, handling or labor charges, or consequential damages.
Limitations
Warranty Details
A complete warranty can be found at the following web address:
www.LifeSourceWater.com/ScaleSolver_Warranty.php
Testing and Regulatory Approvals
Conditions
