background image

IMPORTANT SAFETY PRECAUTIONS 

 

 

 

 

CAUTION: 

Before starting any exercise program, consult with your physician or health 

professional.

 

IMPORTANT: 

Read all instructions carefully before using this product. Retain this owner’s 

manual for the future reference. 

1.

 Plug the power cord of the treadmill directly into a dedicated grounded circuit. 

This product must be grounded well. If it has breakdown, grounding provides a path of least resistance for 

electric current to reduce the risk of electric shock. 

2.

 Position the treadmill on a clear and level surface. Do not place the treadmill on thick carpet as it may interfere 

with proper ventilation. Also, do not place the treadmill near water or outdoors. 

3.

 Position treadmill so that the wall plug is visible and accessible. 

4.

 

NEVER

 start the treadmill while you are standing on the walking belt. After turning the power on and adjusting 

the speed control, there may be a pause before the walking belt begins to move, 

ALWAYS

 stand on the foot rails 

on the sides of the frame until the belt is moving. 

5.

 Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting clothing which 

maybe caught by treadmill. Always wear running or aerobic shoes with rubber soles. 

6.

 Always unplug the power cord before removing the treadmill’s motor cover. 

7.

 Keep small children away from the treadmill during operation. 

8. 

Don’t let go of your hands until you are getting used to treadmill’s waking or running. 

9.

 If you want to stop the exercise or the Treadmill suddenly increases in speed due to an electronics failure, 

please be sure to put your hands on the both uprights firstly, and then step on the ride rail to avoid the damage by 

moving running belt. 

10.

 Always attach the safety key rope to your clothing when using the treadmill. If the treadmill suddenly 

increases in speed due to an electronics failure or the speed being inadvertently increased, the treadmill will 

come to a sudden stop when the safety key is disengaged from the console. Pull off the 

safety

 key and keep it 

well when you do not use the machine. 

11.

 When the treadmill is not being used, the power cord should be unplugged and the safety key should be 

removed. 

12.

 Before starting any exercise program, consult with your physician or health professional. He or she can help 

you to establish the exercise frequency, intensity (target heart zone) and time appropriate to your particular age 

and physical condition. If you have any pain or tightness in your chest, an irregular heartbeat, shortness of breath, 

feel faint or any discomfort while you exercise, 

STOP IMMEDIATELY!

 Consult your physician before continuing. 

13. 

If you observe any damage or wear on the mains plug or on any section of the mains lead then please have 

these replaced immediately by a qualified electrician – do not attempt to change or repair these yourself. 

14.

 When the treadmill is not being used, please pull out the safety lock and store up it in order to prevent the 

children and other people from incorrectly using of the treadmill. 

15.

 The pulse sensors are not medical devices. Various factors, including the user’s movement, may affect the 

accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in determining heart rate 

trends in general. 

 

1

Summary of Contents for BOOMER XT
















Reviews: