19
MAINTENANCE AND ADJUSTMENTS |
VIII. MAINTENANCE AND
ADJUSTMENTS
•
Disconnect all sources of power before cleaning the treadmill.
•
Add a small quantity of mild cleaner to a 100% cotton cloth. Do not spray the cleaner directly on the
walking belt or use acidic and corrosive cleaner.
•
Do not wipe under the walking belt.
•
After a period of exercise, dust and stains may appear on the rear floor. This is normal and can be
simply wiped.
1. Clean the treadmill
•
Simultaneously press and hold both Mode Button and Speed Increase Button on the remote control
for over 3 seconds until device start.
•
Front panel will show "CALI" and keep running with speed 3km/h (2mi/h).
•
Walking belt goes to the left: Turn the left adjusting hole screw clockwise by 1/4 turn.
•
Walking belt goes to the right: Turn the right adjusting hole screw clockwise by 1/4 turn.
•
Walking belt is slipping: Turn the left and right adjusting screws clockwise for 1/2 turn at the
2. Walking Belt Slipping and Correction
Summary of Contents for LFTM-VFOLD
Page 23: ...23 Speed increase Speed decrease Mode Lanyard Hole Function FAQ...
Page 31: ......
Page 32: ...WWW LIFESPANFITNESS COM AU...
