16
Assembling Your Treadmill
Step 3: Attaching the Hand Bars
A. Place two Wave Washers(9) on the inside post of the Right Hand Bar(4).
Then slide the Hand Bar onto the treadmill upright.
B. Place one Nylon Isolation Pad(10) onto a Bolt(11) and slide the Bolt into the
Hand Bar. Rotate the Hand Bar to a horizontal position and tighten with #6
Allen Wrench. Insert the Hand Bar Sticker(5) into place to cover the bolt.
C. Repeat Steps A-B with the Left Hand Bar(3).
5
11
10
9
4
Nylon Pad
(x2)
M10 x 55
(x2)
Wave Washer
(x4)
6mm Allen
Wrench