Getting started
Remove the mitouch device
from the packaging.
Attaching the pads
Attach the adhesive electrode
pads to the press stud connectors
on the treatment lead (x2).
Placement of the pads
Remove the plastic protectors from
the electrode pads and place pads
onto the skin, spanning the desired
treatment area. Pads should be placed
at least 6cm (2.3”) apart, either side of
the affected area. (Examples 1 & 2).
Charging
Plug the USB charging cable into
the charging port of the device.
Charging indicator
Connect the charging cable to
a USB charging source.
Charge until the battery
indicator shows full.
Attaching the leads
Insert treatment lead into Port
A when
using 2 electrode pads.
Insert treatment leads into Port
A and
Port
B when using 4 electrode pads.
6
Turning ON
Press and hold ON/OFF button until
device turns on.
7
mi
touch
QUICK START
GUIDE
