6
A.
Opening the UPWalker:
1.
To open the UPWalker, begin by standing the
UPWalker on all four wheels on a level floor (Fig A1).
2.
Open the Velcro strap on front legs of the frame to
enable opening of the UPWalker (Fig A2). Stow the
strap by wrapping around attached frame and
securing with Velcro.
3.
Standing behind the UPWalker, lift up slightly on
the sit-to-stand assist handles while pulling outward
in opposite directions to open frame (Fig A3).
4.
Continue opening the UPWalker by pushing
slightly inward simultaneously on the sit-to-stand
assist handles to align and connect seat rails with
frame (Fig A4).
5.
To complete opening of the UPWalker, move
seat to most forward position (Fig G1) and push
downward on the seat where marked “Push Down
To Secure” until seat rails sit securely inside the
support brackets on frame (Fig A5).
CAUTION: THE UPWALKER IS NOT SECURE FOR USE IF SEAT RAILS ARE
NOT PUSHED FIRMLY INTO THE FRAME BRACKETS AS DEMONSTRATED
IN FIG A6. DO NOT USE THE UPWALKER IF SEAT RAILS ARE OUT OF
FRAME BRACKETS (FIG A7).
Fig A6
Fig A7
Fig A2
Fig A4
Fig A3
Fig A1
Fig A5
