4
CLEANING THE COLLECTOR ROD
:
We recommend using LifeWise Cleaning Cloths
(Model 63-1513) to help gently clean the collector
rod so your Environizer™ unit can continue to
perform as intended.
When using the LifeWise Cleaning Cloths, always
ensure that the collector rod is completely dry
before reinserting into the Environizer™ unit.
For common household particles
:
• Remove the Collector Rod as described
above.
• Use a soft, damp cloth to wipe the surface of
the Collector Rod.
• Ensure that the Collector Rod is
completely
dry
.
• Insert the Collector Rod back into the unit.
• Clean the Collector Rod every 2-3 weeks,
sooner if needed.
For tobacco smoke or particles that are not
easily removed:
• Remove the Collector Rod as described
above.
• Use a scrub sponge dampened with a mild
soap and water solution and wipe the Collector
Rod from top to bottom.
• Wipe down the Collector Rod with a damp
cloth and insure that no soap residue remains
on the Collector Rod and it is
completely dry
.
(Do not place under running water to rinse.)
• Insert the Collector Rod back into the unit.
• Clean the Collector Rod every week, sooner if
needed.
Your Environizer
™
may experience some
discoloration on the Collector Rod over time. This
is normal and does not affect the performance of
the product in any way.
CLEANING AND MAINTENANCE
:
The Environizer
™
should be cleaned at least
once every three weeks. More frequent
cleaning may be required depending upon
environmental conditions.
• Turn-off and unplug the Environizer
™
.
• Press the control panel release button and
rotate the Top Cover up.
• Remove and clean the collector rod as
previously described.
•
Turn the unit upside-down 2 or 3 times and
hold for at least 3 seconds each time. This
allows the cleaning bars inside the unit to
scrape any accumulated debris off the
electrostatic wires. Note: Do not stick any
foreign objects or your fingers inside the
unit.
• Use a clean, dry cloth to wipe the external
surfaces of the Environizer
™
.
DO NOT USE
WATER, GASOLINE, POLISH, OR ANY
CHEMICAL SOLUTION.
REPLACING THE DUAL UV LAMPS
• Be sure to turn off and unplug your
Environizer
™
Air Purifier.
• Press the Control Panel Release Button and
rotate the Top Cover back.
• Locate the left bulb and turn the arrow towards
the unlock symbol so it is horizontal and facing
3 o’clock.
• Gently grasp the top of the arrow and pull the
bulb housing straight out of the UV socket.
Do
not touch the bulb directly with your hands.
• Do the same for the right bulb and turn the
arrow towards the unlock symbol so it is
horizontal and facing 9 o’clock.
