２
IMPORTANT NOTES
●
Do not install this lift on any surface other than concrete confirming to minimum specifications.
●
Do not install this lift over expansion joints or cracks. Check with building architect.
●
Do not install this lift on a second floor with a basement beneath without written authorization from
building architect.
●
Do not install this lift outdoors unless special consideration has been made to protect the power unit
from inclemency weather conditions.
●
A good level floor is recommended for proper installation and operation. Concrete should be a
minimum of 5” thickness and 3,000 psi tensile strength with steal or fiber mesh reinforcement.
●
The lift is intended to raise the entire body of the vehicle. Do not attempt to lift only part of the vehicle.
Improper use of this equipment could result in damage to the lift, yourself or other property.
●
The lift is intended to lift vehicles only. It is not designed to lift any person or equipment containing
persons.
●
All persons using this equipment should be qualified, responsible persons and should follow the
operation and safety guidelines set forth in this manual.
●
For specifications on concrete pads, please call for technical assistance.
●
Improper installation can cause damage or injury. Manufacturer will assume liability for loss or
damage of any kind, expressed or implied, resulting from improper installation to use of this product.
Read the installation and operation manual in its entirety before attempting to install the lift.
Summary of Contents for 165915LK
Page 16: ...PARTS DRAWING Fig A 1...
Page 17: ...Cable routing Fig A 2...
