１６
165928FXLK
May 2020
SAFETY PROCEDURES
•
Never allow unauthorized persons to operate lift. Thoroughly train new employees in the operation and care of
the lift.
•
Caution: the power unit operates at high pressure.
•
Remove passengers before raising vehicle.
•
Prohibit unauthorized persons from being in shop area while lift is in use.
•
Total lift capacity is 9,000 lbs. with 2,250 lbs. per arm pad. Never exceed the capacity.
•
When approaching the lift with a vehicle, center the vehicle between the columns so that the tires will clear the
swing arms easily. Slowly drive the vehicle up between the posts. Have someone outside the vehicle guide the
driver.
•
Always lift vehicle using all four arms. Never use lift to raise one end or one side of vehicle.
•
Prior to lifting vehicle, walk around the lift and check for any objects that might interfere with the operation of lift
and safety latches; tools, air hoses, shop equipment.
•
Raise vehicles about 3” and check stability by rocking.
•
Prior to lowering vehicle, walk around the lift and check for any objects that might interfere with the operation of
lift and safety latches; tools, air hoses, shop equipment.
•
After lowering, swing the arms out of the path and slowly drive the vehicle out. Have someone outside the
vehicle guide the driver.
ALWAYS LOCK THE LIFT BEFORE GOING UNDER THE VEHICLE.
NEVER ALLOW ANYONE TO GO UNDER THE LIFT WHEN RAISING OR LOWERING.
OWNER / EMPLOYER RESPONSIBILITIES
•
Shall establish procedures to periodically maintain, inspect and care for the lift in accordance with the
manufacturer’s recommended procedures to ensure its’ continued safe operations.
•
Shall provide necessary lockout of energy sources per ANSIZ244.1 –1982 before beginning any lift repairs.
•
Shall not modify the lift in any manner without prior written consent of the manufacturer.
MAINTENANCE SCHEDULE
The following periodic maintenance is the suggested minimum requirements and minimum intervals; accumulated
hours or monthly period, whichever comes sooner. If you hear a noise or see any indication of impending failure -
cease operation immediately – inspect, correct and / or replace parts as required.
