Lift Tech Marine DC AUTO STOP GEN2, Owner'S Manual

ANDROID Guide For 

Control Panel  

5. Press on the Lift - Signal Strength that comes up 

on the phone to pair it. 

6. Once the phone is paired it will look like PIC 3.

You are now done pairing your phone with the 

control panel.If you want to rename your lift simply 

press the rename tab on the top right of the app 

and a box will come up like in PIC 4. Rename it to 

what you want and hit Rename to save it.   

7.   

UP

..... Pressing and holding this button will raise the lift. 

DOWN

....Pressing and holding this button will lower the lift.

LIGHT

..... Pressing this button will turn your canopy light on or off.

LOCK

..... Hold for 5 seconds to lock or unlock the control panel.

*If your neighbors have a Lift Tech Marine unit make sure they are not using 

their lift while you are programming.*

1. Go to Google Play and search for Lift Tech Marine and download the app. 

Once installed open the app. 
2. To activate the Bluetooth pairing sequence press the UP and DN buttons 

on the control panel at the same time then release.  (See picture below).

3. Press the scan button on the top right of your phone. (See PIC 1)

4. When the phone finds the motor it will look like PIC 2. 

PIC 1

PIC 2

PIC 3

PIC 4