Liftkar MTK I 5
2.2 SAFETY MEASURES
Start exercising with a low-weight load only. As soon as you are perfectly handling the system
1.
of LIFTKAR, you can increase the weight up to full load.
Keep out of the danger area beneath the cargo.
2.
The load has to be fastened at the frame of LIFTKAR by the strap bar.
3.
Lifting the load on level ground (that means without steps) only by switching direction UP
4.
(see
picture A
, chapter
4
). Till maximum height is reached! Descending by switch direction
DOWN (see
picture A
, chapter
4
).Do not descend by switching direction UP: that means: After
having reached the maximum height the switch direction UP must not be used further, as
undesirable accelerations could occur.
For maintenance work and repairing you must remove the battery unit.
5.
Wear only working clothes and shoes in due order to avoid injuries and accidents caused by
6.
stumbling over or being caught.
3 STARTING OPERATION
Put the charged battery unit in its place and insert the plug.
The yellow control LED at the cover of the motor unit is lightning.
The crank drive system is switched on by pressing the tumbler switch at the upper or lower handhold (see
picture A
).
Always pull out the plug after use!
If the plug socket remains inserted more than 24 hours, there is a risk of discharging too much and the batteries
could be permanently damaged.
1: Down - 2: Up
A
