13
2.4
Illustration of the load chain configuration
Attention!
Use original chain of the manufacturer only! These original chains meet the high stress
and service life standards required.
Single fall version
Double fall version
Sprocket wheel
Hold down
Chain guide
Chain box
Lift limiter
(limit stop)
Hook tackle
Chain fork
Hook block
Figure 5: Configuration of load chain
3
Assembly
Assembly work should only be carried out by trained specialist in accordance with DGUV V54 (BGV D8) § 24.
3.1
Mechanical assembly
3.1.1
Hook tackle
The hook tackle is used to attach loads for hoists in single fall version.
Rubber buffer with
vulcanized metal
washer
Threaded bolt
Plastic cover with
capacity label and
chain size
Casing with mark 4
or 5
Pressure disk
Load hook complete
(incl. axial pressure
bearing)
Rubber buffer
2 hexagon head
screws with self-
locking nuts
Casing
Pressure disk
Load hook complete
(incl. axial pressure
bearing)
Hook tackle for
chains 4×12; 5×15 and 5.2×15
Hook tackle for
chains 7×22 and 7.2×21
Figure 6: Details of the hook tackle
Summary of Contents for STAGEKET
Page 55: ...55 13 Example of Declaration of Conformity...
Page 56: ...56 14 Example of Declaration of Incorporation...
Page 57: ...57...
