7. Reversal Height Setting
a)
Press and hold
SET
Button until “1” appears on the display, next
press the
UP
button until “7” appears on the display to enter this
function setting then release the button.
b)
Press the
SET
button again. The unit is now in reversal height
adjustment mode. You will see a figure “0” with a flashing dot on the
display.
c)
Press
UP / Down
button once to set the reversal height while
closing (0~9).
d)
Press
UP
button to increase , or
DOWN
button to decrease.
Figure “0”
: The door will return to the open limit position.
Figure “1~9”
: The door will rebound to the position of the whole
travel. One tenth to Nine tenths of the whole travel etc...
e)
Press
SET
button to confirm the settings and it will return to
standby status automatically and display “ll”.
NOTE:
The reversal height is set on “0” as default.
SET
UP
C
ODE
DOWN
SET
UP
C
ODE
DOWN
SET
UP
C
ODE
DOWN
increase height
decrease height
SET
UP
C
ODE
DOWN
16
