LIFTPRO LPO0600, Installation Instructions & User Manual

9. Transmitter Buttons Recognition Setting

a)

 Press and hold 

SET

 Button until “1” appears on the display, next 

press the 

UP 

button until “9” appears on the display to enter this 

function setting then release the button.

b)

 Press the 

SET

 button again. The unit is now in button recognition 

function adjustment mode. You will see a figure “1” with a flashing 

dot on the display.

c) 

Press 

UP / Down

 button once to select if you want all the 4 

buttons to control one operator, or a separate coded button can 

control the operator.

Figure “0”: The button recognition function is closed

. It means 

if you coded 1 button with 1 operator, then all the 4 buttons on the 

remote can control the operator. This is suitable for users who only 

have 1 automatic door at home.

Figure “1”: The button recognition function is open.

 If you coded 

the first button with first operator, then the first button will be the 

only button on the remote that can control the operator. Suitable 

for users who have more than 1 automation doors/gates at home.

d)

 Press 

SET

 button to confirm the settings and it will return to 

standby status automatically and display “ll”.

NOTES:

1. 

The buttons recognition is set on “1” as default.

2.

 After coding the hand sets, only the coded button can control the 

operator.

A. Codes Memory Quantity Setting

a)

 Press and hold 

SET 

Button until “1” appears on the display, next 

press the 

UP

 button until “A” appears on the display to enter this 

function setting then release the button.

b)

 Press the 

SET

 button again, the unit is now in remote quantity 

adjustment mode. You will see a figure “A” again, but with a flashing 

dot on the display.

c)

 Press 

UP / Down

 button once to set the remote quantity. 

(A or 1~9).

d) 

Figure “A”means the maximum quantity 50pcs. Press 

UP/DOWN

button once to increase or decrease quantity.

The remote quantity is set on 5pcs*N, N=1~9. (The quantity is 

the multiple of 5)

e) Press 

SET

 button to confirm the settings and it will return to 

standby status automatically and display “ll”.

NOTE:

 The remote quantity is set on “A” as default.

SET

UP

C

ODE

DOWN

SET

UP

C

ODE

DOWN

SET

UP

C

ODE

DOWN

SET

UP

C

ODE

DOWN

SET

UP

C

ODE

DOWN

SET

UP

C

ODE

DOWN

SET

UP

C

ODE

DOWN

SET

UP

C

ODE

DOWN

SET

UP

C

ODE

DOWN

increase Qty

decrease Qty

18