Sectional Steel Track Assembly
A:
1500mm
C:
1000mm
Sleeve
Sleeve
Sleeve
B:
1500mm
E:
1000mm
D:
1000mm
2 Part Steel Track
3 Part Steel Track
Figure 6
Figure 7
1.
2-Parts Track:
As Fig.6, slide the A rail into the sleeve, slide the B rail into the sleeve.
3-Parts Track:
As Fig.7, slide the C rail into the sleeve, slide the D rail into the sleeve; slide the E rail into the sleeve.
2.
Cut the plastic thread; pull the screw rod along with inner chain to the end rail position (Fig.8)
1.
As Fig.9, release the nut & spring.
2.
Tighten the nut in the correct position as shown in Fig.10. Cut the plastic tape and the plastic thread
on sprocket. Rail assembly is now complete.
Figure 8
Figure 9
Figure 10
8
