22
Loosen
Block
Button
Pull backward the lever, that is to
pull tight; push forward the lever, that is
to release. Before leaving the truck, the
operator should hold tightly the lever.
Caution
In case of brake system doesn’t work or
emergency occurs, you can tighten this
lever to stop the truck urgently.
Steering
column
tilting
angle
adjustment [16]
Position of steering wheel is
adjustable. Push down the lever at the left
side of direction column, and adjust the
steel wheel to the favored place, then pull
up the lever to lock.
Caution
a.
Only after stopping the truck and
pulling up the hand brake lever can you
adjust the tilting angle of steering
column.
b.
After adjustment, pull the steering
wheel to make sure it being locked.
Reversing lever[17]
It‟s installed on the left of the steering
column. These series forklift trucks are
electronic reversing, push or pull this lever to
realize the following functions
：
1
1 gear
2
2 gear
3
3 gear
0
Neutral
Before changing travelling direction, step the
brake pedal until the truck completely stops,
then move the lever forward to F1, and move
to F2 through F1; if retreat needed, step the
brake pedal to slow down the truck, move
backward to R1, and then move to R2
through R1.
Caution
Only place the lever in neutral can you
start the engine
3. Truck body and others
Load backrest
The load backrest improves stabilization
when loading goods. Never use forklift truck
