Safety Notice
Caution - use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure
This laser product is certified as a CLASS 2 laser product to the requirements
of the US Federal Product Performance Standard for Laser Products
contained in the regulations in 21 CFR Subchapter J except for specific
deviations described in FDA Laser Notice #50.
This machine incorporates embedded, Class 3B and 4 lasers which are
capable of producing hazardous levels of laser radiation. However, this
product incorporates a protective housing and controls in its design such that
there is no exposure or human access to levels of laser radiation above Class
2.
Tested to IEC 60825-1:2007
447nm wavelength, 0.16mW maximum power, 200uSec pulse duration
532nm wavelength, 0.26mW maximum power, 200uSec pulse duration
637nm wavelength, 0.26mW maximum power, 200uSec pulse duration
780nm wavelength, 0.14mW maximum power, 16.6mSec (Class 1)
CLASS 2 – DO NOT STARE INTO THE BEAM
AS WITH ANY PRODUCT CONTAINING LASERS, DO NOT DISASSEMBLE
THE PROJECTOR FOR ANY REASON. DISSASSEMBLING THE PROJECTOR
MAY RESULT IN HAZARDOUS LASER RADIATION EXPOSURE.
UNDER NO CIRCUMSTANCE SHALL ATTEMPTS BE MADE TO OPERATE
THIS DEVICE WHEN IT IS DAMAGED OR DISASSEMBLED.
Return it to the manufacturer for repair or replacement.
All service to the
product shall be performed by Light Blue Optics Ltd., their authorised agents, or
personnel trained by Light Blue Optics Ltd.
bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 6
LT1221_UG_V2_9 | Page 6
