Light Bright
Pixeldot7
11. Information
This device complies with the CE directive:
• in terms of the directive: 2014/35/EU Low Voltage Directive, (Directive
2014/35/EU of the European Parliament and of the Council of
26.02.2014 on the approximation of the laws of the Member States
relating to electrical equipment designed for use within certain voltage limits)
• in terms of the directive: 2014/30/EU Electromagnetic Compatibility (Directive
2014/30/EU of the European Parliament and of the Council of 26.02.2014 on the
approximation of the laws of the Member States relating to electromagnetic
compatibility)
The device complies with IP20 and is therefore protected against the penetration of solid
foreign bodies with a diameter of more than 12mm (first code number 2), while it is sensitive
to moisture, splash and jet water.
During operation, it is mandatory to connect the device to a power supply system equipped
with a powerful grounding (Class 1 device according to EN 60598-1 directive). Furthermore, it
is recommended to protect the supply line of the equipment from indirect contact and/or
short circuits with correctly dimensioned residual current circuit breakers.
Only use the device if the room temperature is below 45°C.
Before starting any maintenance on the device, it must cool down for at least 10 minutes
after disconnecting the power supply to minimize the risk of damage to the chips. For
maintenance or repair work on the chips, the unit must cool down for at least another 20
minutes to prevent burning.
18
