USER MANUAL
13
5. Remove the air outlet cover by
simply pulling it out.
6. Remove the current Active Carbon
Filter by simply pulling it out.
Now install a new Active Carbon Filter,
re-install the air outlet cover, push in
the door to close.
The product is now ready for use again.
* After filters replacement, remember to reset the filter hours in the display menu: select the
icon
and pressing
for 5 seconds to reset.
8.2 Clean the Pre-filters
The Pre-filters need to be checked and cleaned regularly to avoid dust accumulated and
wind flow efficiency reduced.
• Do not clean the Pre-filters with a vacuum.
• If the pre-filter is damaged, worn or broken, do not use.
Steps:
1. Push in on the right side of the front
door and release to open.
* The other two doors can be opened by
pushing out from inside.
2. Remove the air inlet cover by simply
pulling it out.
Take out the Pre-filter and clean with a
brush. After cleaning, re-install it back.
