INSTALLATION INSTRUCTIONS
For Flex II
300 Watt Magnetic
Transformer - Wall
Plastic (dull)
Metal (shiny)
Live Feed
Metal
Connectors
Back
Front
Flex Track
Front View
Flex Track
Side View
Live Feed
Side View
Live Feed with canopy
Live Feed
Front View
Plastic
Plastic
Metal
Metal
Metal Connectors
3/4"
Bare wire
Transformer
Feed Wire
Metal Connectors
Me
Plastic (dull)
Metal (shiny)
Live Feed
Metal
Connectors
Back
Front
Flex Track
Front View
Flex Track
Side View
Live Feed
Side View
Live Feed with canopy
Live Feed
Front View
Plastic
Plastic
Metal
Metal
Metal Connectors
3/4"
Bare wire
Transformer
Feed Wire
Metal Connectors
Me
Plastic (dull)
Metal (shiny)
Live Feed
Metal
Connectors
Back
Front
Flex Track
Front View
Flex Track
Side View
Live Feed
Side View
Live Feed with canopy
Live Feed
Front View
Plastic
Plastic
Metal
Metal
Metal Connectors
3/4"
Bare wire
Transformer
Feed Wire
Metal Connectors
Me
Plastic (dull)
Metal (shiny)
Live Feed
Metal
Connectors
Back
Front
Flex Track
Front View
Flex Track
Side View
Live Feed
Side View
Live Feed with canopy
Live Feed
Front View
Plastic
Plastic
Metal
Metal
Metal Connectors
3/4"
Bare wire
Transformer
Feed Wire
Metal Connectors
Me
Stem
Track
Plastic (dull)
Metal (shiny)
Live Feed
Metal
Connectors
Back
Front
Flex Track
Front View
Flex Track
Side View
Live Feed
Side View
Live Feed with canopy
Live Feed
Front View
Plastic
Plastic
Metal
Metal
Metal Connectors
3/4"
Bare wire
Transformer
Feed Wire
Metal Connectors
Me
Plastic (dull)
Metal (shiny)
Live Feed
Metal
Connectors
Back
Front
Flex Track
Front View
Flex Track
Side View
Live Feed
Side View
Live Feed with canopy
Live Feed
Front View
Plastic
Plastic
Metal
Metal
Metal Connectors
3/4"
Bare wire
Transformer
Feed Wire
Metal Connectors
Me
Plastic (dull)
Metal (shiny)
Live Feed
Metal
Connectors
Back
Front
Flex Track
Front View
Flex Track
Side View
Live Feed
Side View
Live Feed with canopy
Live Feed
Front View
Plastic
Plastic
Metal
Metal
Metal Connectors
3/4"
Bare wire
Transformer
Feed Wire
Metal Connectors
Me
Plastic (dull)
Metal (shiny)
Live Feed
Metal
Connectors
Back
Front
Flex Track
Front View
Flex Track
Side View
Live Feed
Side View
Live Feed with canopy
Live Feed
Front View
Plastic
Plastic
Metal
Metal
Metal Connectors
3/4"
Bare wire
Transformer
Feed Wire
Metal Connectors
Me
Plastic (dull)
Metal (shiny)
Live Feed
Metal
Connectors
Back
Front
Flex Track
Front View
Flex Track
Side View
Live Feed
Side View
Live Feed with canopy
Live Feed
Front View
Plastic
Plastic
Metal
Metal
Metal Connectors
3/4"
Bare wire
Transformer
Feed Wire
Metal Connectors
Me
_________________
tel.800-670-8137 www. lightwavesconcept .com
SAVE THESE INSTRUCTIONS
AND REFER TO THEM WHEN ADDITIONS
TO OR CHANGES IN THE TRACK CONFIGURATION ARE MADE.
_________________
tel.800-670-8137 www. lightwavesconcept .com
________________
tel.800-670-8137 www.ledwaves.com
Live Feed
1] Make sure the power is turned off before starting work.
2] Insert the Flex II track through the opening in the live feed, making sure the metal
connectors align properly. The metal connectors on the Flex II track should touch the
metal connectors on the live feed. [Fig.1] illustrates proper insertion.
3] After inserting the Flex II track, tighten the screws on the live feed if necessary.
4] Make sure the live feed is mounted on the Flex II track tightly and securely.
The Life Feed carries powers from the transformer into the Flex II track. The track is polarized to fit with the live feed. Please check where the metal connectors are on the live feed
before you attempt to insert the Flex II track into the Life Feed. Make sure the metal connectors are aligned properly.
Connecting the Live Feed
Track
1] Unscrew the cap on the bottom of stem mount and insert the track.
2] Close the stem mount by screwing the cap back on. [Fig. 5]
There is a voltage drop along the feed wire. Use as short a feed wire as possible to minimize
this loss of voltage.
1] Once the live feed is connected to the track, cut the power feed to a desired length, mak-
ing sure to leave some slack in the wire.
2] Strip the outer coating from the end of each feed wire to expose 3/4” of inner core. [Fig. 2]
3] Insert the wires into the connectors on the bottom of the transformer casing, and
tighten set screws [Fig. 3]
Connecting the Live Feed to the Transformer
Incorrect Connection
If you insert the Flex Track the wrong way, the the metal connectors will not touch.
[Fig. 4]
Fig. 1
Fig. 3
Fig. 2
Fig. 5
Fig. 4
3
4
