18
DEUTSCH
ENGLISH
Environmental Protection:
The company Music Store professional GmbH always strives to reduce the burden of packaging to
a minimum. The use of environmentally friendly and recyclable materials is always of elementary
importance. Please return the packaging for recycling after use:
Troubleshooting:
When selecting the installation location, be careful not to expose the unit to excessive heat, mois-
ture, or dust. Make sure that no cables are exposed. You are endangering your own safety and the
safety of third parties!
Disconnect the device from the power supply before filling! Do not fill with hot liquids!
Only use preparations with a written indication of suitability for this type of device. Only use
high-quality water-based fog fluids recommended by your distributor. Other fog fluids can lead to
plugging or dripping of the device. Make sure that there is always a sufficient amount of fog fluid
in the tank. Operation without fog fluid leads to pump damage and overheating of the heating
element.
Only start up the unit after you have familiarised yourself with its functions. Do not allow the
appliance to be operated by persons who are not familiar with the appliance. If devices no longer
function correctly, this is usually the result of improper operation!
Always store the unit in a dry place!
If the unit is to be transported, always empty the tank and use the original packaging to avoid
damage during transportation.
Please note that for safety reasons, unauthorized modifications to the device are prohibited.
If the appliance is used in any other way than described in this manual, this may result in damage
to the product and void the warranty. In addition, any other use is associated with hazards, such as
short circuits, fire, electric shock, etc.
Cleaning the heating element:
The heating element should be cleaned regularly every 30 operating hours to avoid deposits. Use a
suitable fog machine cleaner which is available from specialist dealers (see product suggestions on
page 8).
How to empty the fog machine:
Empty the fog machine and pour the cleaner into the tank as delivered. Then operate the machi-
ne‘s fog function a few times in a well-ventilated place. The number of repetitions depends on the
degree of contamination of the evaporator elements. After use, empty the machine completely,
remove the remaining cleaner completely and rinse the tank thoroughly with distilled water.
The fog fluids recommended by us are environmentally harmless and can be disposed of via the
sewage system. Apart from the fuse, there are no parts to be maintained inside the unit. Main-
tenance and service work is reserved exclusively for authorised specialist dealers!
