background image

 

 
 

 

 

ENGLISH 

Safety instructions:

 

 
 

DANGER! (For babies and children) 

Packaging, plastic films and other packaging materials must be properly stored or 

disposed of. They must be kept out of the reach of babies and children due to the 

risk of 

suffocation

 

Make sure that children never use the device unattended! In addition, make sure that 
children do not remove any (small) parts from the device, as they could suffocate by 

swallowing them! 
 

DANGER! (Electrical shock due to high voltages in the device) 

Do not remove the housing. There are no parts to be maintained in the device. Inside the 

device there are components which are under high electrical voltage. 
The device must not be used as soon as damage or the absence of components, 

protective devices or housing parts is noticed! 

 

DANGER! (Electric shock caused by short circuit) 

Modifications to the power cord or plug are prohibited. Failure to do so may result in fire 

or death due to electric shock! 

 

NOTE! (Fire hazard) 

Ensure that the unit is not exposed to a direct source of heat and is used away from open 
fire. Never cover or tape any ventilation slits or the device itself. 

 

NOTE! (Operating conditions) 

Due to its structural characteristics, the device is designed for indoor use. Never expose 
the device to rain, moisture or liquids as this may cause damage. Vibrations, dirt or 

sunlight can also cause damage - avoid them! 

 

NOTE! (Power supply) 

It is essential that you check that the device voltage matches your local mains voltage. It 

is strongly recommended that you fuse your mains socket with a residual current circuit 
breaker (FI). 

 
If you do not use your device for a longer period of time, disconnect it from the mains.   

to minimize danger. The same applies to storm conditions such as thunderstorms or 

floods, etc..   
 

 
 

 
 

 
 

 
 

 
 

Summary of Contents for LIG0015924-000










Reviews: