Document 36 II Stormaster Version 1.02 © Copyright 2008 LPI
25
Figure 16.
Termination of the HVSC Lower End
Tools required for the completion of the HVSC Lower Termination include:
• Compression or Mechanical Crimping Tool (for 95mm
2
crimping lug).
• Sharp Knife.
• 2 x screwdrivers (used as friction cutting tool handles).
• Shifting Spanner.
• Tape Measure (cm)
.
Lower Termination Kit Consists of
1 x Roll Waterproofing Tape.
1 x 95mm Crimp Lug.
2 x Warning Stickers.
1 x Earth Clamp.
1 x Insulation Friction Cutting Tool.
The following steps outline the termination of the lower end of the High Voltage Shielded
Cable to the lightning earth.
The inner screen copper conductors and the outer screen copper conductors should be
connected to the earthing system.
Summary of Contents for Stormaster 15
Page 1: ...HidgbVhiZg H LIGHTNING PROTECTION INTERNATIONAL PTY LTD ABN 11 099 190 897 www lpi com au...
Page 14: ...12 Document 36 II Stormaster Version 1 02 Copyright 2008 LPI Figure 8...
Page 50: ...48 Document 36 II Stormaster Version 1 02 Copyright 2008 LPI Installation Notes...
Page 51: ...Inside Back Cover Blank...