42
Document 36 II Stormaster Version 1.02 © Copyright 2008 LPI
Figure 42.
Lightning Strike Recorder (LSR1)
The Lightning Strike Recorder (LSR1) should be installed at a position along the
downconductor length where it can be accessed easily for inspection. Typically the LSR1
should be installed approximately 1.5m from ground level or alternatively within the earth pit
at the lower termination point of the HVSC.
When installing the LSR1 the following should be considered:
• The LSR1 should be mounted away from areas where damage may occur due to theft,
vandalism or nearby operations.
• The LSR1 can be enclosed in a security enclosure but the display should be kept visible to
allow for the checking of recorded strikes.
Summary of Contents for Stormaster 15
Page 1: ...HidgbVhiZg H LIGHTNING PROTECTION INTERNATIONAL PTY LTD ABN 11 099 190 897 www lpi com au...
Page 14: ...12 Document 36 II Stormaster Version 1 02 Copyright 2008 LPI Figure 8...
Page 50: ...48 Document 36 II Stormaster Version 1 02 Copyright 2008 LPI Installation Notes...
Page 51: ...Inside Back Cover Blank...