Lytecaster Recessed Downlighting
1003R
Page 1 of 1
5" Aperture
0
Incandescent Non-IC Remodeler Frame-In Kit
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group • J0810
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit
Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Satin
Baffles
Basic
Pinhole
Recessed
Enclosed
Wall
Open
Reflector Cone
Cone
White
Adjustable
Diffusers
Washer
Wet Location
1003R
1045
1012
1008
1005
1071
1011
1027
1038
1021
1035
1084CD
1046
1012NM
1008NM 1005WH
1027WH
1038NM
1024
1035WH 1084WH
1046CD
1013
1010
1005NM
1027BK
1048
1078
1085
1013BK
1010NM 1005BNM
1027NM
1048NM
1090
1013WH
1076
1027BNM
1013CD
1076WH
1027CD
1013NM
1027BKNM
1013BKNM
1027CDNM
1013CDNM
Eyeball:
1022
1022WH
1082
Frame-In Kit
Reflector Trim
2
3
5
1
4
Top View
13”
Ceiling Opening
5 1/2"
Features
1. Mounting Ring:
.032 (#22 ga.) galvanized steel. Accommodates existing
ceilings up to 2" thick. Attaches securely to any type of ceiling material
without tools using (3) mounting straps provided. Push-in/twist-out clips
hold reflector flush to ceiling. Includes adhesive backed aperture template.
2. Junction Box:
2 1/2" X 2 1/2" X 3 1/2" (21 cu. in.) .032 (#22 ga.) galvanized
steel. U.L. listed for 90° C supply wire. Integral cable clamps permit attach-
ment of non-metallic (#12 or #14 ga.) Romex
®
cable without tools
or additional connectors. Attaches to mounting ring without tools.
3. Socket Housing:
Impact extruded aluminum or galvanized steel.
4. Socket:
Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 (300 VOLT 200° C) leads to junction box.
5. Thermal Protector:
Meets NEC and U.L. requirements. Do not install
insulation within 3 inches of fixture sides or wiring compartment nor above
fixture in such a manner as to entrap heat.
Labels
UL (Suitable for Damp Locations)
Romex
®
is a registered trademark of General Cable Industries Inc.
