Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2009 Philips Group • B0309
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Advent Lytespan
®
1 and 2 Circuit Track
61XMCE
Page 1 of 3
2000mm
3000mm
4000mm
1.59mm
29.46mm
2
5
127.78mm
7
1
6
4
3
Plain Track
Features
1. Advent Lytespan Track:
6063-T5 Aluminum 1.8mm wall thickness.
2. Track Mounting Clips:
0.61mm Spring steel, in black or white; furnished with
track units.
3. Toggle Bolt & Screws:
furnished with track units.
4. Conductor (3):
16A current carrying capacity.
5. Insulating Liner:
1.2mm wall, thermoplastic.
6. Neutral Conductor:
on bead side of track.
7. Polarity Bead:
identifies the neutral conductor.
8. Live End:
molded thermoplastic. Includes contacts for power supply leads.
9. Dead End Cover:
molded thermoplastic.
10. Mini Coupler:
connects track units mechanically and electrically.
Mechanical
Track units plug together and lock securely to prevent accidental separation. Track
units can be field cut.
Finish
All painted finishes are baked enamel.
Mounting
Track may be surface mounted to ceilings or walls. The track may be stem mount-
ed. The track is not intended to be cable mounted. The track can also be recessed,
see Specification Sheet 7515.
Electrical
Two circuits individually controllable, rated 16 amps, at 220 - 240 volts 50 Hz
per track circuit (16 amps total for the two circuits), when supplied by a 220/240
volt, 50 Hz, single phase 3-wire branch circuit with a grounded neutral. The track
is polarized and continuously grounded throughout. Electrical conductors are
concealed in a insulating liner. Lytespan lighting units attach to the track at any
point and can be adjusted to operate on either track circuit. Not intended for use
with a power cord or a convenience receptacle adapter. Magnetic and electronic
transformers require different dimmer controls. Use the proper control device on
the track. Caution should be used when operating dimming controls on 3 wire
circuiting (the neutral conductor may overload). For additional information on dim-
ming, call 1-800-833-3664. All wiring must be in accordance with National and
Local Codes.
Labels
I.B.E.W.,CE
Finishes
Plain Track
2m Catalog No.
3m Catalog No.
4m Catalog No.
Aluminum
612MALCE 613MALCE 614MALCE
Black
612MBKCE 613MBKCE 614MBKCE
White
612MWHCE 613MWHCE 614MWHCE
